Example .meb files
Status:
[x]ready — version 3.0.0
A set of test examples of the .meb standard. Each file targets one area for verifying parsers, validators and viewers (2D / 3D).
All files are in version 3.0.0 — a tree: a cabinet is a group with the cabinet role, and its panels, hardware and solids are nodes in children (specification §7). The version number next to an example's title says in which version the tested feature was introduced.
01-oklejanie.meb — edge banding test
- 1 cabinet, without 3D data (
has_3d: false, panels withoutposition/rotation), - 4 panels 700×500×18, each banded on a different edge (top / bottom / left / right),
- the panel name indicates the banded side,
- goal: verification of edge banding rendering on the individual sides in the 2D view.
02-szafki-wiercenia.meb — 3D directions test (cabinet)
- 1 cabinet (left side, right side, bottom, top) assembled into a 3D body, 3D positioning through
position/rotation, - banded only at the front — each panel on the
leftedge (= front), - dowel + cam lock joints connect the sides with the top and the bottom; the cam lock is modelled realistically: the channel for the bolt is a drilling in the end edge of the bottom/top (it looks like a dowel), and at its end a Ø15×12 drilling from the face (the cam housing) — in the bottom from
face: top, in the top fromface: bottom; the bolt is screwed into the side (a shallow face hole), - all faces (
face: top) facing the inside of the cabinet (the sides turned with their face inwards, the top with its face down) — all the assembly is on the inner face, - holes asymmetric along the depth (dowel at the front
y=60, cam lock at the backy=220), - goal: verify all directions from the 2D panels and the 3D preview — faces inwards, front/back, drilling directions and the
zdepth. In 3D the back of a panel has diagonal hatching (reverse side), the face stays clean.
03-skosy-hole.meb — slanted segments and holes test
- panel 700×500×18, without 3D data (
has_3d: false), outlinewith two cut corners (seg_skos_1,seg_skos_2) and a through cut-outhole,- drillings in both slanted segments and in the cut-out wall (
on_segment+s), - slanted segment
seg_skos_1banded (routing.edging.walls = ["seg_skos_1"]),seg_skos_2without edge banding, - goal: verification of outline drillings and of edge banding rendering on a selected slanted segment.
04-szafka-skosna.meb — slanted cabinet (roof sloped sideways 30°)
- cabinet without fasteners (no drillings),
- roof sloped sideways: looking from the front, the top is rotated to the left by 30° (
rotation y=-30) — the left side lower (300), the right side higher (452.4), - the sides are rectangular (the slope runs along the width, so each side has a constant height; they differ only in height),
- the top inserted between the sides (it fits against the inner faces, x 18..282), flush with their tops,
- front edges banded (each panel
edge_side: left= front), - the top–side joint bevelled —
bevel30°, - goal: correct representation of a cabinet with a sloped roof. Bevels rendered: in 2D as a wedge cut-out on the perpendicular sides + projection on the face, in 3D as an actual cut of the body's edge.
05-obrzeze-segmenty.meb — edge banding per outline segment (2.1.0)
- panel 700×500×18, without 3D data (
has_3d: false), outlinewith two cut corners (seg_skos_1,seg_skos_2),- each slanted segment banded with a different material through the array form of
routing.edging(2.1.0):seg_skos_1→edg_dab,seg_skos_2→edg_bialy, - goal: verification of per‑segment edge banding (different materials on one outline).
06-kompakt-obrobka.meb — edge finishing of a compact board (2.2.0)
- HPL compact board 12 mm without edge banding, 3D data (
has_3d: true), - worktop 1200×600×12: three edges sanded with a 1×1 mm chamfer at the face and at the back (
edge_finishonxL,x0,y0), edgeyW(at the wall) without finish (null), - in the worktop a sink cut-out (
holewith rounded corners) finished around the whole perimeter —routing.edge_finish.walls = "all", - shelf 600×300×12 with a rounded corner: straight edges finished through the panel's
edge_finish, the outline arc throughrouting.edge_finish.walls = ["seg_luk"], - goal: verification of reading and rendering the edge finish (sanding and chamfer) on the panel's sides and on the outline / cut-out walls — in 2D and 3D, distinguishable from edge banding.
07-pomieszczenie.meb — room, appliances and hardware (2.3.0)
- group “Kuchnia” with solids (
type: "solid"): a floor, a back wall with a window opening and a left wall with a slope as an outline with thickness (extrusion), a fridge as a mesh (mesh) frommeshes_catalog, - appearance materials
surface(plaster, floor, steel, appliances) — allfurniture: false, - base cabinet with a front on two positioned hinges — each hinge has a Ø35 cup drilling in the front and a Ø5 mounting plate hole in the side, both point to it through
hardware_instance_ref; next to them a list item without a position (screws, quantity 8), - glass shelf — a panel with a non-furniture material (
board,furniture: false), which production skips, - oven cabinet with the oven as a solid — a child of the cabinet (a
solidnode in itschildren), which moves together with the cabinet, - goal: verification of solids, meshes, positioned hardware and its machining operations, and of hiding non-furniture geometry (in the viewer: “Hide non-furniture”).
08-bryla-swobodna.meb — polyhedron: wall with a window and floor (2.4.0)
- one solid (
type: "solid") with polyhedron geometry (polyhedron) — this is how loose single-level geometry from a program that models with edges and faces is stored, - a wall 3000×120×2600 with a 1000×1200 window going through: the front and back faces have the window opening as a second loop, four reveal faces connect the openings,
- a floor in front of the wall as a face without thickness — the polyhedron is open; the edge at the base of the wall belongs to three faces,
- 18 vertices, 27 edges, 11 faces, each element with an
id, - goal: verification of splitting faces with holes into triangles, of drawing edges from the file and of an open surface.
09-ciaglosc-sloja.meb — grain continuity groups in rows (2.5.0, row alignment 2.6.0)
- 1 cabinet with 15 fronts and sides, without 3D data (
has_3d: false), oak board with the grain along the sheet length, - vertical grain (
orientation: "vertical"): row 1 — three fronts 500 × 300 from the left, row 2 — two doors 750 × 1000; the grain passes from three panels into two, and the joints fall in different places, - horizontal grain (
orientation: "horizontal"): two columns of drawer fronts — column 1, 450 wide, with three fronts, column 2, 600 wide, with two, positions counted from the bottom; panels with the grain along the width (grain: "along_width"), - a group without
row: a strip of two sides 720 × 560 — each member a separate row, as in 2.4.0 files, - row alignment (
rows[]): a display cabinet — row 1 two drawer fronts 600 × 200 (no entry, to the start), row 2 a door 900 × 1000 aligned to the center (align: "center") — the remaining row width split in half on both sides; the door's location in the §13.3 notation is#4.2S.1, - the face of each group panel is the side visible from outside (§13.1),
- goal: verification of reading rows and positions (also of members without
row), of row alignment and of the §15.4 rules — continuity of rows and positions, the same dimension along the grain in a row, the block fitting on the sheet along and across the grain, androws[]entries.
The files are intended as implementation examples (a test set), not as a complete catalog of all the standard's capabilities.